this document contains confidential and proprietary information and all design, manufacturing, reproduction, use, patent rights and sales rights are expressly reserved by samtec, inc. this document shall not be disclosed, in whole or part, to any unauthorized person or entity nor reproduced, transferred or incorporated in any other project in any manner without the express written consent of samtec, inc. proprietary note * * do not scale from this print ls2-1xx-xx-xx-d-xxx-x no of positions -05, -10, -15, -20, -25, -30 (per row) row specification -d: double (use ls2-xx-d-xx) lead style -01: through hole -02: surface mount (see fig 2) plating specification -f: flash selective gold (use t-1s13-xx-f-2 & c-79-xx-f) -fm: flash selective gold matte tin remainder (use t-1s13-xx-f-2 & c-79-xx-f) -l: light selective gold (use t-1s13-xx-l-2 & c-79-xx-l) -lm: light selective gold matte tin remainder (use t-1s13-xx-l-2 & c-79-xx-l) -s: selective gold (use t-1s13-xx-s-2 & c-79-xx-s) -sm: selective gold matte tin remainder (use t-1s13-xx-s-2 & c-79-xx-s) -g: gold (use t-1s13-xx-g-2 & c-79-xx-g) -h: heavy gold (use t-1s13-xx-h-2 & c-79-xx-h) -ra1: right angle- shroud down (see fig 3) -ra2: right angle- shroud up (see fig 4) [available only on lead style -01] tail option -k: polyimide film pad (use k-dot-.246-.375-.005, see fig 5) [lead style -02 only] -a: alignment pin (use ls2-xx-d-xx-a, see fig 6) [lead style -02 only] -tr: tape & reel option .250 6.35 ref .0197 sq 0.500 ref (typ) (typ) 2 max sway (no of pos -1) x .07874[2.0000]) .006[.15] .0787 .0050 (typ) 2.000 0.127 .090 2.286 ls2-xx-d-xx c c c fig 1 ls2-110-01-x-d shown .2075 5.270 ref ((no of pos x .07874[2.0000]) +.0618[1.570]) .010[.25] .0787 ref 2.000 (no of pos -1) x .07874[2.0000] ref "a" "a" 02 01 c see note 6 n n-1 .104 2.642 ref (typ) 2 max sway .0787 .0050 (typ) 2.000 0.127 section "a"-"a" contact c c terminal c c sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: 2mm terminal/socket combo by: ls2-1xx-xx-xx-d-xxx-x dwg. no. description: do not scale drawing dean p 4/24/2002 4 1 sheet scale: 3:1 insulator: lcp, color: black socket: phos bronze terminal: phos bronze c:\enterprisevault\dwg\misc\mktg\ls2-1xx-xx-xx-d-xxx-x-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: .003[.08] max. 3. maximum cut flash: .015[.38]. 4. minimum pushout force; terminals: 2 lbs, contacts: .5 lbs. 5. maximum allowable bow: .002 inch/inch after assembly. 6. see application views (sheet 3) for position 01 location. 7. all pin to pin dimensions to be measured from tip to tip. 8. dimension to be measured at bend. 9. shear tails to dimension shown. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision v
this document contains confidential and proprietary information and all design, manufacturing, reproduction, use, patent rights and sales rights are expressly reserved by samtec, inc. this document shall not be disclosed, in whole or part, to any unauthorized person or entity nor reproduced, transferred or incorporated in any other project in any manner without the express written consent of samtec, inc. proprietary note * * 2 max sway (typ) "b" "b" fig 2 ls2-110-02-x-d shown [different as shown, otherwise same as fig. 1] 90 - 4 + 0 .269 .010 6.83 0.25 .031 0.78 .330 8.38 (see note 8) .10 2.6 ref .0060[.152] section "b"-"b" terminal contact .223 5.66 in-process 1 style -02-d in-process views .600 15.24 in-process 2 .155 .005 3.94 0.127 (see note 9) in-process 3 packaging views tube: pt-1-24-04-09 plug: tp-07 style -01 tube: pt-1-24-01-123 plug: tp-03 style -02 (no of pos x .07874[2.0000]) - .15748[4.0000] ref fig 6 -a: alignment pin option ls2-110-02-x-d-a shown [different as shown, otherwise same as fig 2] ls2-xx-d-xx-a .035 ref 0.89 .035 0.893 tube: pt-1-24-01-124 plug: tp-07 style -01-ra1 tube: pt-1-24-01-124 plug: tp-07 style -01-ra2 c sheet of 2mm terminal/socket combo by: ls2-1xx-xx-xx-d-xxx-x dwg. no. description: do not scale drawing dean p 4/24/2002 4 2 sheet scale: 3:1 c:\enterprisevault\dwg\misc\mktg\ls2-1xx-xx-xx-d-xxx-x-mkt.slddrw revision v 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
this document contains confidential and proprietary information and all design, manufacturing, reproduction, use, patent rights and sales rights are expressly reserved by samtec, inc. this document shall not be disclosed, in whole or part, to any unauthorized person or entity nor reproduced, transferred or incorporated in any other project in any manner without the express written consent of samtec, inc. proprietary note * * 2 max sway (typ) fig 3 ls2-110-01-x-d-ra1 shown [different as shown, otherwise same as fig 1] * available only on lead style -01 * .090 .010 2.29 0.25 (see note 9) 90 .079 (see note 7) 2.00 .070 (see note 8) 1.78 contact terminal .302 7.67 style -01-ra1 in-process views in-process 1 90 .070 1.78 (see note 8) .183 4.65 ref in-process 2 .600 15.24 in-process 3 .323 ref 8.21 90 .149 3.78 in-process 4 n-1 n n n-1 board a board b parallel board-to-board application views n-1 n n n-1 board b board a perpendicular board-to-board n-1 n -ra2 -ra1 in-line parallel board-to-board n-1 n 1.732 44.00 ref .945 24.00 ref user direction of un-reeling pocket not detailed c parts must be oriented per the design of the pocket and pocket tool. pockets designed after revision q must orient parts per this view. style-01-ra1 packaging view sheet of 2mm terminal/socket combo by: ls2-1xx-xx-xx-d-xxx-x dwg. no. description: do not scale drawing dean p 4/24/2002 4 3 sheet scale: 3:1 c:\enterprisevault\dwg\misc\mktg\ls2-1xx-xx-xx-d-xxx-x-mkt.slddrw revision v 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
this document contains confidential and proprietary information and all design, manufacturing, reproduction, use, patent rights and sales rights are expressly reserved by samtec, inc. this document shall not be disclosed, in whole or part, to any unauthorized person or entity nor reproduced, transferred or incorporated in any other project in any manner without the express written consent of samtec, inc. proprietary note * * .481 ref 12.21 90 .070 1.78 in-process 2 .440 11.18 in-process 3 90 .149 3.78 .162 4.11 ref in-process 4 .600 15.24 style -01-ra2 in-process views in-process 1 2 max sway (typ) ls2-110-01-x-d-ra2 shown [different as shown, otherwise same as fig 1] fig 4 * available only on lead style -01 * .090 .010 2.29 0.25 (see note 9) .079 (see note 7) 2.00 90 .070 (see note 8) 1.78 contact terminal "r" ref .246 6.25 ref .019.020 0.490.51 "s".020 [.51] fig 5 -k: polyimide film pad option note: "r" = (no of pos x .07874[2.0000]) +.06181[1.570] "s" = ("r" - .2460[6.248]) / 2 .335 8.51 style-01-ra2 packaging view parts must be oriented per the design of the pocket and pocket tool. pockets designed after revision q must orient parts per this view. 1.732 44.00 ref .945 24.00 ref user direction of un-reeling pocket not detailed c sheet of 2mm terminal/socket combo by: ls2-1xx-xx-xx-d-xxx-x dwg. no. description: do not scale drawing dean p 4/24/2002 4 4 sheet scale: 3:1 c:\enterprisevault\dwg\misc\mktg\ls2-1xx-xx-xx-d-xxx-x-mkt.slddrw revision v 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
